ROHM Product Detail

QS6M4
2.5V Drive Nch+Pch MOSFET

电界效果晶体管MOSFET。复合各一颗Pch和Nch MOSFET。提供通过采用细微流程的「超低阻值的设备」而在广泛领域得以应用的功率MOSFET，并且结合用途，以多样的小型高功率复合型的产品线对应多种市场需求。

Data Sheet 购买 *
* 本产品是标准级的产品。
本产品不建议使用于车载设备。
Data Sheet 购买 *

主要规格

 
型号 | QS6M4TR
Status | 可购买
封装 | TSMT6
包装形态 | Taping
包装数量 | 3000
最小独立包装数量 | 3000
RoHS | Yes

特性：

Package Code

SOT-457T

JEITA Package

SC-95

Number of terminal

6

Polarity

Nch+Pch

Drain-Source Voltage VDSS[V]

30

Drain Current ID[A]

1.5

RDS(on)[Ω] VGS=2.5V(Typ)

0.26

RDS(on)[Ω] VGS=4V(Typ)

0.18

RDS(on)[Ω] VGS=Drive (Typ)

0.26

Total gate charge Qg[nC]

1.6

Power Dissipation (PD)[W]

1.25

Drive Voltage[V]

2.5

Mounting Style

Surface mount

Storage Temperature (Min)[℃]

-55

Storage Temperature (Max)[℃]

150

Package Size [mm]

2.8x2.9 (t=1.0)

Find Similar

特点：

・2.5V驱动型 Nch+Pch 中功率MOSFET

参考设计 / 应用评估套件

 
    • Reference Design - REF66003
    • Compact NFC Wireless Charge with 300mW Output

    • ML7661-EVK-001 is equipped with the power transmitting side LSI ML7661, and ML7660-EVK-001 is equipped with the power receiving side LSI ML7660. By facing the antenna, it is possible to output a power supply of 300mW. Wireless battery charging can be achieved in a small space.

      The antenna is a product of Amphenol.
      Datasheet Download:

      For any inquiries related to antennas, kindly use the inquiry form provided below.
      Amphenol Website Contact Form

    • Reference Design - REF67011
    • NFC Telemetry-Based Rotating Component Torque Sensing

    • In this reference design, a strain sensor and the ML7660-EVK-002 are attached to the shaft. It is now possible to directly measure and collect data on the strain of the rotating shaft, which was previously impossible.

      Specifically, the measurement process follows these steps:
      1) The power supply LSI wirelessly supplies power to the power receiving LSI.
      2) The power receiving LSI supplies power to the strain sensor via a wired connection.
      3) The strain sensor measures the strain of the rotating shaft.
      4) The strain sensor sends the strain measurement data to the power receiving LSI via a wired connection.
      5) The power receiving LSI wirelessly transmits the measurement data to the power supply LSI.

      This reference design uses the STREAL SR300 sensor manufactured by Glosel. If you plan to use Glosel sensors, please check directly with Glosel for availability and procurement details in advance.
      https://www.glosel.co.jp/en/contact/

X

Most Viewed