BD63524AEFV
µ-step适用 36V耐压 步进电机驱动器系列
BD63524AEFV
µ-step适用 36V耐压 步进电机驱动器系列
BD63524AEFV是适用于1/8µ-step的步进电机驱动器。作为基本功能,是低功耗双极PWM恒流驱动器,额定电源为36V、额定输出电流(DC)为2.5A,接口为CLK-IN驱动型。通过内置DAC,励磁模式适用于Full step (2相励磁)、Half step (1-2相励磁)、Quarter step (W1-2 相励磁)、Eighth step (2W1-2相励磁)模式,对于电流衰减方式,可自由设定FAST DECAY/SLOW DECAY的比率,可对所有电机实现很好的控制状态。另外,也可使用一个系统电源进行驱动,因此有助于提高整机设计的便利性。
主要规格
特性:
Power Supply Voltage (Max.) [V]
28
Power Supply Voltage (Min.) [V]
8
Vcc (Max.)[V]
36
Iout (Max.)[A]
2.5
Iout Peak (Max.)[A]
3
Output On Resistance (Typ.)[Ω]
0.35
Step
to 1 / 8
MIX DECAY Function
Yes
Single power supply input
Yes
Automotive class
No
Interface
CLK-IN
Operating Temperature (Min.)[°C]
-25
Operating Temperature (Max.)[°C]
85
Package Size [mm]
9.7x6.4 (t=1)
特点:
- Single power supply input (rated voltage of 36V)
- Rated output current:(DC) 2.5A
- Low ON resistance DMOS output
- CLK-IN drive mode
- PWM constant current control (other oscillation)
- Built-in spike noise cancel function (external noise filter is unnecessary)
- Full step, Half step, Quarter step, Eighth step drive
- Timing free for changing step modes
- Current decay mode switching function (linearly variable FAST/SLOW DECAY ratio)
- Normal rotation & reverse rotation switching function
- Power save function
- Built-in logic input pull-down resistor
- Power-on reset function
- Thermal shutdown circuit (TSD)
- Over current protection circuit (OCP)
- Under voltage lock out circuit (UVLO)
- Over voltage lock out circuit (OVLO)
- Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
- Adjacent pins short protection
- Inverted mounting protection
- Microminiature, ultra-thin and high heat-radiation (exposed metal type) HTSSOP-B28 package
Reference Design / Application Evaluation Kit
-
- Evaluation Board - RAGU-main1-EVK-001
The RAGU is Evaluation Tool controls the stepping motor driver IC to demonstrate and evaluate its functions
-
- Evaluation Board - RAGU-op1-EVK-001
The RAGU is Evaluation Tool controls the stepping motor driver IC to demonstrate and evaluate its functions