ROHM Product Detail

BD28C57HFJ-LB (新产品)
PWM Types DC/DC Converter IC

This product is a rank product for the industrial equipment market. This is the best product for use in these applications. The PWM type DC/DC converter for AC/DC provides an optimal system for all products that require an electrical outlet. This IC supports both isolated and non-isolated devices and enables simpler designs of various types of a low power consumption electrical converters. This IC has a lineup of VDD UVLO that support both Si and SiC of MOSFET. Power supplies can be designed flexibly by connecting a current detection resistor for the switching externally. Current is restricted in each cycle and excellent performances are demonstrated in a bandwidth and transient response since a current mode control is utilized. The switching frequency can be set by external resistor and capacitor on the RTCT pin.

主要规格

 
型号 | BD28C57HFJ-LBE2
Status | 推荐品
封装 | SOP-J8
包装形态 | Taping
包装数量 | 2500
最小独立包装数量 | 2500
RoHS | Yes

特性:

BR UVLO

No

External LATCH Function

No

AC Monitor Function

No

VH Terminal UVLO

No

Frequency Reduction Function

No

Current Detection Resistors

External

Over Current Detection Voltage (typ.)[V]

1

Dynamic Over Current Detection

No

FET

External

Controller Type

PWM

Vin1(Min.)[V]

6.9

Vin1(Max.)[V]

28

SW Frequency (Max.)[kHz]

500

BR PIN

No

Channel

1

Light Load mode

Yes

EN

No

Thermal Shut-down

Yes

Under Voltage Lock Out

Yes

Operating Temperature (Min.)[°C]

-40

Operating Temperature (Max.)[°C]

125

Package Size [mm]

4.9x6.0 (t=1.65)

Find Similar

特点:

  • PWM Current Mode Method
  • Low Power Consumption
  • The VDD Pin UVLO Function
  • Over Current Protection Function per Cycle
  • Switching Frequency Setting Pin

参考设计 / 应用评估套件

 
    • Evaluation Board - BD28C57HFJ-EVK-001
    • This evaluation board outputs an isolated voltage of 24 V from an input of 300 VDC to 900 VDC, and the maximum output current is 2 A. A SiC MOSFET (SCT12H12NZ) with 1700 V, RdsON = 1.1 Ω typ is used so that an input voltage of up to 900 VDC can be applied. The control IC used is the BD28C57HFJ, which is suitable for driving SiC MOSFET. The control method is current mode. The oscillation frequency is approximately 65 kHz, and the duty max is 50%.

  • User's Guide
X

Most Viewed