BD8316GWL
升压/反转 2ch 开关稳压器

BD8316GWL是搭载了升压、反转2个信道的二极管整流型电流模式控制的开关稳压器。内置SW用FET和带软启动功能的升压负载SW,可减少外接部件。此外,各信道还可独立控制,因此可轻松构建非动作信道的低功耗序列。

Data Sheet 购买 *
* 本产品是标准级的产品。
本产品不建议使用于车载设备。

主要规格

 
型号 | BD8316GWL-E2
Status | 推荐品
封装 | UCSP50L1
包装形态 | Taping
包装数量 | 3000
最小独立包装数量 | 3000
RoHS | Yes

特性:

ch

2

Integrated FET / Controller

Integrated FET

Topology

Boost / Inverting

Synchronous / Nonsynchronous

Non-synchronous

Vin1(Min.)[V]

2.5

Vin1(Max.)[V]

5.5

Vout1(Min.)[V]

2.5

Vout1(Max.)[V]

18

Iout1(Max.)[A]

1

SW frequency(Max.)[MHz]

1.76

Operating Temperature (Min.)[°C]

-35

Operating Temperature (Max.)[°C]

85

Package Size [mm]

1.8x1.5 (t=0.55)

Find Similar

特点:

・ Wide input voltage range of 2.5V to 5.5 V
・ High frequency operation 1.6MHz
・ Incorporates Nch FET of 230mΩ/22V and Pch Pow FET of 230mΩ/15V
・ Incorporates Soft Start (4.2msec(typ))and hight side switch of boost channel
・ Independent ON/OFF signal(STB). Built-in discharge SW for step up channel
・ Small package UCSP50L1( 1.8mm×1.5mm, 4× 3 grid, 11pin, WLCSP)
・ Circuits protection OCP,SCP,UVLO,TSD

Reference Design / Application Evaluation Kit

 
    • Evaluation Board - BD8316GWL-EVK-001
    • The BD8316GWL converter is a power supply solution designed for portable devices. It can operate with a wide input voltage range of 2.5V~5.5V and has a 1μA standby current. It is possible to enable and disable each channel. Users can select which channel to output to, by changing the STB1 and STB2 pins to High or Low. The small package design is suitable for miniaturizing the power supply.

  • User's Guide
X

Most Viewed