Rohm Referencedesigns

REFACDC036 - Reference Design

PFC BCM (Boundary Current Mode) Method Output 200 W 400 V (BD7692FJ)

The BD7692FJ-EVK-001 reference board outputs 400V voltage from the input of 90Vac to 264Vac. The output current supplies up to 0.5A. The BD7692FJ which is BCM method PFC controller IC is used.


  • The BD7692FJ supplies the system which is suitable for all of products that requires PFC.
  • BCM is used for PFC part, and Zero Current Detection reduces both switching loss and noise. An auxiliary winding wire is not required because of ZCD by a resistor.

BD7692FJ-EVK-001
Loading...

Specifications

 
Board Number Input Voltage Range Input Frequency Output Voltage Maximum Output Power Output Current Range PF(Power Factor) Efficiency Output Ripple Voltage Hold Time Operating Temperature
BD7692FJ-EVK-001 90 to 264Vac 47 to 63Hz 400V(Typ.) 200W Iout=0.5A 0 to 0.5A *1 0.97(Typ.) AC230V Iout=0.5A 96%(Typ.) 14Vpp(Typ.) *2 20ms(Min.) Vout min 280V -10 to 65deg.C
Remarks:
*1 Please adjust operating time, within any parts surface temperature under 105 °C
*2 Not include spike noise

Distribution Inventory

 
Board Number Distributor Quantity Available
BD7692FJ-EVK-001 Chip One Stop, Inc. 2
Ameya Holding Limited 1
DigiKey 1
Inquiry 1

Key Components

 
Board Number Product Category Part Number Datasheet Status SPICE LTspice® ? Thermal Model Symbol & Footprint 3D STEP Samacsys ECAD Library Calc Tool ROHM Solution Simulator
BD7692FJ-EVK-001 AC/DC Converters ICs BD7692FJ - Recommended - - -
BD7692FJ-EVK-001 Standard Rectifier Diodes RR2LAM6S - Active - - -
BD7692FJ-EVK-001 Fast Recovery Diodes RF05VAM2S - Recommended - - - - -
BD7692FJ-EVK-001 190 to 800V Power MOSFETs R6024KNX - Recommended - - - Solution Simulator