BU33TD2WNVX
1ch 200mA CMOS LDO Regulators
BU33TD2WNVX
1ch 200mA CMOS LDO Regulators
BU**TD2WNVX/BU**TD3WG系列是采用超小型封装SSON004X1010(1.0mm×1.0mm×0.6mm) & SSOP5(2.9mm×2.8mm×1.15mm)的200ｍA输出高性能FULL CMOS稳压器。电路电流只有35μA，功耗低，同时又有优良的噪声特性和负载响应特性，适合用于逻辑IC的电源、用于RF的电源、用于照相机模块的电源等各种用途。
主要规格
特性：
ch
1
Withstand Voltage (Max.)[V]
6.5
Vin(Min.)[V]
1.7
Vin(Max.)[V]
6
Iout(Max.)[A]
0.2
Vout Type
Fixed
Vout Accuracy
±1.0% (Ta=25℃)
Circuit Current[mA]
0.035
Dropout Voltage (Typ.)[V]
0.22(Io=0.2A)
Ripple Rejection [dB]
70
Load Regulation[mV]
10(Io=0.01mA to 100mA)
Output Capacitor[µF]
0.22
Shutdown Function
Yes
Thermal Shut-down
Yes
Over Current Protection
Yes
Over Voltage Protection
No
Under Voltage Lock Out
No
Discharge Function
Yes
Soft Start
No
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
85
特点：
・±1%的高精度输出电压(VOUT<2.5V的产品是±25mV)・高波纹抑制比：70dB(Typ. 1kHz)
・支持小型陶瓷电容(CIN=Co=0.47µF)
参考设计 / 应用评估套件
-
- Reference Design - REF67011
- NFC Telemetry-Based Rotating Component Torque Sensing
In this reference design, a strain sensor and the ML7660-EVK-002 are attached to the shaft. It is now possible to directly measure and collect data on the strain of the rotating shaft, which was previously impossible.
Specifically, the measurement process follows these steps:
1) The power supply LSI wirelessly supplies power to the power receiving LSI.
2) The power receiving LSI supplies power to the strain sensor via a wired connection.
3) The strain sensor measures the strain of the rotating shaft.
4) The strain sensor sends the strain measurement data to the power receiving LSI via a wired connection.
5) The power receiving LSI wirelessly transmits the measurement data to the power supply LSI.This reference design uses the STREAL SR300 sensor manufactured by Glosel. If you plan to use Glosel sensors, please check directly with Glosel for availability and procurement details in advance.
https://www.glosel.co.jp/en/contact/
